How to change a 2D light bulb in 3 Steps

• Only Three Steps to change a 2D light bulb - Watch our Video and Do It Yourself ! 

Step 1: Turn off the light at the wall.

Step 2: Remove the cover: Take out the screws remembering to support the cover or by gently pushing the cover inward, within the mounting and then slide the cover to one side, releasing the holding clips - it will release.

Step 3 – Changing the lamp: Change the bulb by holding the centre point of the bulb unit (not the bulb’s itself) and pulling it out of the fitting. If the unit is stiff, just gently wiggle the lamp on the way out. There is no catch or clips to release the lamp, it is just a simple push fit system.

To replace: simply push the new bulb back into the fitting, and ad secure the cover with the screws or push it back on. Depending on the size you will need either 2pin or 4pin. 

• Lenehans Has It :

We provide a wide range of top branded light bulbs.

View the 2D light bulbs.